Welcome to the WorkSafe Smart Move Electrical and Electronics Industry.
Have you read the General Module, completed the test and printed your WorkSafe Smart Move General certificate?
The Electrical and Electronics Module should be done AFTER the General Module.
If it is some time since you have done the General Module you should read the Review Module. The test for this module includes some questions based on the Review Module.
There are common hazards in the electrical and electronics industry. It is important to learn about these hazards and how to work safely.
The Electrical and Electronics Industry contains information on:
Within this industry you may be involved in a range of work activities such as using measuring instruments, soldering, using hand, power and specialist tools and constructing circuits.
 |
|
Only licensed electrical workers can legally perform electrical work. |
This includes new electrical installations and alterations, and repairs to existing installations. An unqualified person should not be employed or allowed to undertake electrical work.
|
|
Apprentices and trainees must be supervised by a qualified electrical worker at all times. |
Your employer must make sure you are properly trained and supervised and are given instructions for safe work procedures and equipment is in good working order.
It is important that you work in a safe manner, not only for your own safety but also the safety of others.
